Reading the evidence
Reading Gnaw Marks: Rat, Mouse or Something Else?
Rodents chew constantly, and what they leave behind is a record. The width of the tooth marks, the size of the hole and the color of the chewed edge can tell you which animal did it and whether it happened this week or years ago.
Gnaw mark sizes
- Mouse tooth marksAbout 1/32 inch
- Rat tooth marksAbout 1/16 inch
- Mouse holesOften 1½ in or less
- Rat holesAbout 2 to 3 inches
- Fresh chewingPale wood, shavings
How do I tell rat gnaw marks from mouse gnaw marks?
Look at the size. Wildlife extension guides put mouse tooth marks at about 1/32 inch wide and rat marks at about 1/16 inch, nearly twice as wide. Mouse entry holes are often 1½ inches across or less; rat holes are usually 2 to 3 inches. Fresh gnawing is pale with sharp edges and shavings nearby.
Rats and mice have front teeth that never stop growing, so they gnaw to keep them worn down and to get through obstacles. That habit is what lets them widen a small gap into a doorway, and it’s why soft sealing materials don’t last.
Size: the main clue
| Feature | House mouse | Rat |
|---|---|---|
| Paired tooth grooves | About 1/32 inch wide | About 1/16 inch wide |
| Entry holes | Often 1½ inches or less, clean and round | About 2 to 3 inches, rougher edges |
| Chewed food | Small nibbles from many items | Larger chunks; may carry food away |
| Droppings nearby | About ¼ inch | Up to ¾ inch |
Measurements come from the Internet Center for Wildlife Damage Management’s house mouse and Norway rat pages. Use a ruler in your photos so you can compare later or show a professional.
Fresh or old?
- Fresh: bright, light-colored wood or plastic, sharp edges, fresh shavings or chewed insulation on the floor below.
- Old: darkened, weathered wood, rounded edges, dust or cobwebs in the grooves.
Wildlife researchers note that fresh piles of gnawed wood, insulation or other material indicate active rodents. To confirm, clean up the shavings and look again in a few days. Our guide to telling new rodent signs from old ones has more tests.
Where gnawing shows up
- Bottom corners of doors, especially garage and utility doors.
- Edges of holes around pipes and wires under sinks and behind appliances.
- Plastic bins, cardboard boxes and bags of pet food or birdseed.
- Wiring in attics, garages and car engines.
- Rubber door and garage seals, and irrigation or ice maker lines.
Gnawing on wires is a fire concern. Our post on whether rats can cause a house fire explains why.
Not every chew mark is a rat or mouse
Squirrels leave larger, rougher gnawing and are active during the day, often at the roofline. Dogs and cats chew too, but their marks are irregular and wet-looking rather than paired grooves. Insects such as carpenter bees make perfectly round holes in wood with sawdust below, not tooth grooves. If you hear daytime noises in the attic, see rat or squirrel in the attic.
For a broader look at which rodents live around Mesquite, the rodent species guide covers roof rats, Norway rats and house mice.
More questions
Why do rats chew on everything?
Their front teeth grow continuously, so they gnaw to keep them short and to get through materials in their way.
Can mice chew through walls?
They can chew through drywall, wood, cardboard, plastic and rubber. Metal, concrete and hardware cloth stop them, which is why those materials are used for sealing.
Should I patch a gnawed hole right away?
Seal it with chew-resistant material once you know no rodents are trapped inside. Sealing a hole with animals still inside can trap them in walls, where they may die and cause odors.
Found fresh chewing?
Call to have the damage and entry points checked.
